SETUP GUIDE

Receive

Transmit

Switch

Enjoy

Step 1 - Transmitter

These are the Lokee Silent Disco transmitters. Ensure they are unpacked and that the radio antennas are screwed in and upright.

We send out 3 transmitters as standard for every hire. Our headphones can switch between up to 4-channels so you need a transmitter for each channel.

Step 2 - Connecting

Ensure the transmitters are set to OFF, then connect the power cables and plug in to a power socket.

The first transmitter you setup should be set to CH1 (Channel 1).

Step 3 - Inputs & Switching

Connect the RCA cable into the AUDIO INPUT on the front of the transmitters, switch the mains on and then flick the switch from OFF to LO on the back of the transmitter.

You will know it is on because the red POWER light on the front will be on.

LO (Best quality 100ft range) / HI (500ft range)

Step 4 - Connecting Your Device

Connect the AUX cable to your audio device through the headphone socket. This can be your phone, laptop, tablet or other. We will also send out a selection of cables for different audio connections – please contact us for further information.

Now repeat STEP 1 to STEP 4 with two more transmitters. The second transmitter setup should be set to CH2 (Channel 2) and then the third to CH3 (Channel 3) all connected to additional audio devices. This will now enable the listener to switch between the different audio on the 3 different devices.

Top Tip – Keep transmitters elevated and spaced apart from each other using separate power supplies when possible.

Step 5 - Turning On The Headphones

Press the TUNE/ON/OFF button on the headphones until the light comes on.

Pressing the TUNE/ON/OFF button lightly will switch between channels 1, 2, 3 and 4.

Step 6 - Adjusting Headphone Volume

Adjust the volume of the headphones using the VOL. control. We recommend for best audio quality to turn up the volume on your audio device (phone/laptop/etc.) and then allow the listener to adjust the volume themselves using the VOL. control on their headphones.

Turn to LED lights on/off by holding down the VOL. control button.

Top Tip – Use the highest media quality possible when playing/streaming music and the equaliser (EQ) settings on your device can be used to fine tune if required.

TIME TO PARTY!

Now all you need to worry about is what tunes you are going to play! Holding the TUNE/ON/OFF button will turn the headphones off or they will auto turn off once the transmitters have been turned off.

Enjoy!

Free UK Delivery And Collection

All our equipment comes with setup instructions and there is a technical support number if required.